The r100 F USES a specially designed flute geometry, with a 40/42 variable helix Angle, in soft steel and hard steel, as well as other long Angle materials, up to 850/ mm (25 HRC). FIREX provides additional tools for other tools.
Radio frequency 100 VA (stainless steel)
Designed for a hard application with a 36/38 spiral Angle, r100 VA style variable helical end milling cutter provides longer tool life and maximum efficiency when milling stainless steel. As a supplementary material, it can be used as a complementary nano – titanium aluminum coating.
Radio frequency 100 va/nf (stainless steel/coarse)
R100 VA/nf is coarsely combined with the same 36/38 variable helical structure of r100 tiles, which increases the profile of rough machining and requires less power consumption and cutting pressure in complex processing conditions.
Radiofrequency 100 Ti (titanium alloy)
RF100 Ti is specially designed for the titanium alloy milling of 6Al4V and other alloys. The 35/38 variable helix Angle is combined with the angular radius design to optimize the cutting depth at the slot, thick and deep. All of the criteria are super a (AlTiN), and apply additional tools to more stringent materials.
100 years radiofrequency (aluminum)
Aluminum is the main material of r100. The 40/42 variable spiral Angle and rake face Angle are most suitable for long and non-ferrous metal materials. Mirror polished.
Rf 100/wf (aluminum/coarse)
Designed for aluminum and aluminum alloy fast metal cutting. Large open groove can make high inflow rate without chip packing. The company’s unique rough gear profile reduces the cutting force while maintaining an excellent edge.
Rf 100 SF (overdone)
A/f /445/445/46 variable helical end milling cutter is suitable for high speed milling operation of ultra-fine machining and 0.3 times width for semi-rough machining. Because of the large spiral Angle, its surface quality is very good. The materials range from all mild steel, cast iron, nonferrous metals and high alloy materials. FIREX provides additional tools for other tools. Coolant fed version can be obtained from inventory.
Radio frequency 100 H (hardened steel)
With a gradual core diameter, it provides the maximum hardness of hard milling applications. In order to provide superior edge strength, tilt and mitigation Angle optimization.
Rf 50 (rough and complete)
The combination of rough grinding tools can provide high metal removal rate. Reducing vibration can improve workpiece surface and improve tool life. The optimized flute configuration maximizes the load on the chip and reduces the deflection of all steel. Also applicable to titanium and titanium alloys, aviation materials and nickel-base alloys.