The straight groove design of our company provides accurate and accurate hole position with excellent surface quality. In deep hole applications, coolant provides coolant for high permeability, and RT150 GG is designed to cut short cutting materials such as cast aluminum (larger silicon content 10%), cast iron and short cutting brass. Guhring offers a very different style. The RT150GG series 768 and 769 drill have 120 taper relief points, which are most suitable for use in aluminum and short cutting brass. The RT150 GG series 6069 and 6070 are specially designed for cast iron, which has a special grade of DK255F wear-resistant carbide and 130 surface grinding. These tools are recommended for at least 200 psi of coolant pressure of CNC equipment.
Hard alloy bit – HTH/rt800
The company offers two different types of insert carbide drill bits, allowing users to use disposable insert design to achieve high penetration rate of carbide electric drill. By reducing the number of cycles and improving the hole quality, the rt/ht 800 series drills have replaced the traditional shovel in many applications. Applicable to nc machine tool, minimum of 200 psi coolant pressure.
HT800WP prompt HT800WP
The HT800 WP drill has 1 xd,1.5 xd,3 xd,5 xd,7 xd and 10 xd coolant. The fed’s owner style is from 11.0 mm to 25.5 mm in diameter. The design of three different pass-hole cemented carbide blades allows the end user to effectively drill aluminum, cast iron, steel, stainless steel and aerospace materials quickly and accurately.
RT800WP prompts RT800WP
The RT800 WP drill is drilled in 3xD, 5xD, 7xD coolant, with diameters ranging from 16.0 mm to 40.5 mm. The holder is a side lock design that allows quick replacement cycles. The sequins are specially designed for aluminum. The tin coating design is very good for mild steel, and the insertion of flame x provides ultimate heat resistance and abrasion resistance.